Zum Inhalt
Gruppenleiter

Dipl.-Ing. Dominic Stangier

Dominic Stangier Profilbild © Petra Coddington

E-Mail senden

Telefon: +49 231 755 7339

Raum: 1.05

Forschungstätigkeiten

  • Leitung und strategische Ausrichtung der Forschungsgruppe PVD-Technologien
  • Koordination und Durchführung von drittelmittelfinanzierten Forschungsprojekten
  • Bilaterale Auftragsforschung und Beratung zu Fragestellungen in der Beschichtungstechnik
  • Einwerbung von Drittmitteln in der Grundlagenforschung und anwendungsorientierter Fragestellungen
  • Gutachtertätigkeit
  • Reviewer für internationale Fachzeitschriften im Bereich der Oberflächentechnik: Carbon, Surface and Coatings Technology, Diamond and Related Materials, Thin Solid Films, Materials & Design, Surfaces and Interfaces, Tribology International, JVSTA, Coatings, Metals

Lehr-/Dozententätigkeiten

  • Koordinator und Dozent der Vorlesungsreihe Oberflächentechnik 2 mit den Schwerpunkten:
    • PVD-Verfahren
    • CVD-Verfahren
    • Aktuelle Entwicklungen und Forschungsansätze in der Oberflächentechnik
  • Betreuung von Projekt- und Abschlussarbeiten im Rahmen des Bachelor- und Masterstudiengangs

Veröffentlichungen

2022

  • Tillmann, W.; Stangier, D.; Meijer, A.; Krebs, E.; Ott, A.; Platt, T.; Lopes Dias, N. F.; Hagen, L.; Biermann, D.: Adapting the Surface Integrity of High-Speed Steel Tools for Sheet-Bulk Metal Forming. In: Journal of Manufacturing and Materials Processes 6 (2022), 37.
  • Tillmann, W.; Wittig, A.; Lopes Dias, N.F.; Stangier, D.; Thomann, C. A.; Moldenhauer, H.; Debus, J.: Silicon- and tungsten-containing hydrogen-free and hydrogenated amorphous carbon films for friction-reducing applications. In: Diamand & Related Materials 123 (2022), 108866.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Schaak, C.; Höges, S.: Heat treatment of binder jet printed 17-4 PH stainless steel for subsequent deposition of tribo-functional diamond like carbon coatings. In: Materials & Design 213 (2022), 110304.
  • Felinks, N.; Rinschede, T.; Biermann, D.; Stangier, D.; Tillmann, W.; Fuß, M.; Abrahams, H.: Investigation into deep hole drilling of austenitic steel with advanced tool solutions. International Journal of Advanced Manufacturing Technology 118 (2022), S.1087-1100.

2021

  • Tillmann, W.; Hagen, L.; Stangier, D.; Lopes Dias, N. F.; Görtz, J.; Kensy, M. D.: Surface Pre-treatments of 316L LBM Substrates and their Effects on the Microstructural Evolution and Adhesion of PVD CrAlN Coatings. In: Surface & Coatings Technology 428 (2021), 127905.
  • Tillmann, W.; Wittig, A.; Stangier, D.; Debus, J.; Thomann, C.-A.; Aurich, D.; Brümmer, A.; Moldenhauer, H.: Structure and tribo-mechanical properties of MoSx:N:Mo thin films synthesized by reactive dcMS/HiPIMS. In: Journal of Materials Engineering and Performance (2021), doi.org/10.1007/s11665-021-06447-z
  • Tillmann, W.; Fehr, A.; Stangier, D.: Impact of Tungsten Incorporation on the Tribo-mechanical Behavior of AlCrWxSiN Films at Room and Elevated Temperature. Coatings 11 (2021), 1033.
  • Aurich, D.; Wittig, A.; Stangier, D.; Debus, J.; Thomann, C.-A.; Tillmann, W.; Brümmer, A.: MoS2-Dünnschichten für unsynchronisierte, trockenlaufende Schraubenmaschinen. Vakuum in Forschung und Praxis 33 (2021), S. 40 - 44.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Fu, Q.; Kruis, E.: Bias-voltage effect on the TiN nanoparticle injection into magnetron sputtered CrN thin films towards nc-TiN/nc-CrN composites. Applied Surface Science Advances 6 (2021), 100149.
  • Tillmann, W.; Kokalj, D.; Stangier, D.: Impact of structure on mechanical properties and oxidation behavior of magnetron sputtered cubic and hexagonal MoNx thin films. Applied Surface Science Advances 5 (2021), 100119.
  • Tillmann, W.; Lopes Dias, N. F.; Franke, C.; Kokalj, D.; Stangier, D.; Filor, V.; Mateus-Vargas, R. H.; Oltmanns, H.; Kietzmann, M.; Meißner, J.; Hein, M.; Pramanik, S.; Hoyer, K.-P.; Schaper, M.; Nienhaus, A.; Thomann, C. A.; Debus, J.: Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology 421 (2021), 127384.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Schaak, C.; Höges, S.: Coatability of Diamond-Like Carbon on 316L Printed by Binder Jetting. Additive Manufacturing 44 (2021), 102064.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Matveev, S.; Thomann, C. A.; Debus, J.: Structure and tribo-mechanical properties of Si- and W-containing amorphous carbon based multilayers. Applied Surface Science Advances 5 (2021), 100105.
  • Wernicke, S.; Hahn, M.; Detzel, A.; Tillmann, W.; Stangier, D.; Lopes Dias, N. F. Tekkaya, A. E.: Force reduction by electrical assistance in incremental sheet-bulk metal forming of gears. Journal of Materials Processing Technology 296 (2021), 117194.
  • Tillmann, W.; Lopes Dias, N. F.; Franke, C.; Kokalj, D.; Stangier, D.; Thomann, C. A.; Debus, J.: Mechanical properties and adhesion behavior of amorphous carbon films with bias-voltage controlled TixCy Interlayer on Ti6Al4V. Diamond & Related Materials 115 (2021) 108361.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Fu, Q. Kruis, E.: Influence of the PVD process conditions on the incorporation of TiN nanoparticles into magnetron sputtered CrN thin films. Surface & Coatings Technology 409 (2021), 126935.
  • Tillmann, W.; Grisales, D.; Stangier, D.; Thomann, C. A.; Debus, J.; Nienhaus, A.; Apel, D.: Residual stresses of TiAlN and TiAlCN monolayer and multilayer coatings deposited by DCMS and HiPIMS Technology. Surface and Coatings Technology 406 (2021), 126664.
  • Baumann, I.; Hagen, L.; Tillmann, W.; Hollingsworth, P.; Stangier, D.; Schmidtmann, G.; Tolan, M.; Paulus, M.; Sternemann, C.: Process characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders. Surface & Coatings Technology 405 (2021), 126716.
  • Tillmann, W.; Stangier, D.: Application of Nanostructured Bionic Thin Layers to Enhance the Wear and Friction Behavior of Tools for Sheet-Bulk Metal Forming. In: Merklein, M.; Tekkaya, A.E.; Behrens, B.-A.: Sheet Bulk Metal Forming, Springer (2021), S. 216 - 238.
  • Tillmann, W.; Lopes Dias, N. F., Stangier, D.; Matveev, S.; Thomann, C. A.; Debus, J.: Design of Cu- and Ag-containing amorphous carbon multilayers with improved tribo-mechanical properties. Materials Letters 284 (2021), 128905.
  • Tillmann, W.; Wittig, A.; Stangier, D.; Moldenhauer, H.; Thomann, C.-A.; Debus, J.; Aurich, D.; Bruemmer, A.: Temperature-dependent tribological behavior of MoSx thin films synthezised by HiPIMS. Tribology International 153 (2021), 106655.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Fu, Q.; Kruis, E.; Kesper, L.; Berges, U.; Westphal, C.: On the synthesis and structural evolution of artificial CrN/TiN nanocomposites. Applied Surface Science 535 (2021), 147736.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Sternemann, C.; Paulus, M.; Wagner, R.; Lützenkirchen-Hecht, D.: On the relationship between structure and oxidation behavior of magnetron sputtered cubic and hexagonal MoNx thin films. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 17th DELTA User Meeting & Annual Report (2021), S. 89 - 94.
  • Schneider, E.; Kokalj, D.; Binder, S.; Scholz, G.; Moron, M.; Birkwald, D.; Thiering, N.; Sternemann, C.; Paulus, M.; Stangier, D.; Tillmann, W.: An X-ray diffraction study on AlCrVY(O)N thin films. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 17th DELTA User Meeting & Annual Report (2021), S. 77 - 78.
  • Tillmann, W.; Gu, J.; Stangier, D.; Lopes Dias, N. F.; Kokalj, D.; Sternemann, C.; Paulus, M.: On the crystalline structure of TiB2 thin films deposited by different PVD technologies and bias voltages. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 17th DELTA User Meeting & Annual Report (2021), S. 69 - 74.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Berndt, J.; Klemme, S.; Kesper, L.; Berges, U.; Westphal, C.; Thomann, C. A.; Debus, J.: X-ray photoelectron spectroscopy analysis of the chemical state in erbium- and gadolinium-containing amorphous carbon films. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 17th DELTA User Meeting & Annual Report (2021), S. 37 - 40.

2020

  • Fu, Q.; Kokalj, D.; Stangier, D.; Kruis, F. E.; Tillmann, W.: Aerosol synthesis of titanium nitride nanoparticles by direct current arc discharge method. Advanced Powder Technology 31 (2020), S. 4119 - 4128.
  • Tillmann, W.; Grisales, D.; Marin Tovar, C.; Contreras, E.; Apel, D.; Nienhaus, A.; Stangier, D.; Lopes Dias, N. F.: Tribological behavior of low carbon-containing TiAlCN coatings deposited by hybrid (DCMS/HiPIMS) technique. Tribology International 151 (2020), 106528.
  • Kokalj, D.; Debus, J.; Stangier, D.; Moldenhauer, H.; Nikolov, A.; Wittig, A.; Brümmer, A.; Tillmann, W.: Controlling the Structural, Mechanical and Frictional Properties of MoSx Coatings by High-Power Impulse Magnetron Sputtering. Coatings 10 (2020), 755.
  • Tillmann, W.; Wojarski, L.; Stangier, D.; Manka, M.; Timmer, C.: Application of the eutectic high entropy alloy Nb0.73CoCrFeNi2.1 for high temperature joints. Welding in the World 64 (2020), S. 1597 - 1604.
  • Tillmann, W.; Stangier, D.; Grisales, D.: TiAlN coatings by means of high energy sputtering: A study on the effect of residual stresses on the performance of TiAlN coatings. Vakuum in Forschung und Praxis 32 (2020), S. 26 - 32.
  • Denkena, B.; Breidenstein, B.; Lucas, H.; Keitel, M.; Tillmann, W.; Stangier, D.: Influence of Residual Stresses in heat-treated High-Speed Steels on the Adhesion of CrAlN Coatings. Journal of Heat Treatment and Materials 75 (2020), S. 163 - 176.
  • Tillmann, W.; Stangier, D.; Hagen, L.; Biermann, D.; Freiburg, D.; Meijer, A.: Tribological investigation of surface structures processed by high-feed milling in HVOF sprayed WC-12Co coatings. Surface & Coatings Technology 395 (2020), 125945.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Schaper, M.; Hengsbach, F.; Hoyer, K.-P.: Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface & Coatings Technology 394 (2020), 125748.
  • Behrens, B.-A.; Tillmann, W.; Biermann, D.; Hübner, S.; Stangier, D.; Freiburg, D.; Meijer, A.; Koch, S.; Rosenbusch, D.; Müller, P.: Influence of Tailored Surfaces and Superimposed-Oscillation on Sheet-Bulk Metal Forming Operations. Journal of Manufacturing Materials Processing 4 (2020), 41.
  • Tillmann, W.; Fehr, A.; Stangier, D.: Effects of heat treatments on the microstructure and the adhesion of Cr, Ti, Al, and Zr HiPIMS films deposited on Al2O3 and ZrO2-8Y2O3 coatings. Surface & Coatings Technology 393 (2020), 125766.
  • Behrens, B.-A.; Meijer, A.; Stangier, D.; Hübner, S.; Biermann, D.; Tillmann, W.; Rosenbusch, D.; Müller, P.: Static and oscillation superimposed ring compression tests with structured and coated tools for Sheet-Bulk Metal Forming. Journal of Manufacturing Processes 55 (2020), S. 78 - 86.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Nienhaus, A.; Thomann, C. A.; Wittrock, A.; Moldenhauer, H.; Debus, J.: Effect of the bias voltage on the structural and tribo-mechanical properties of Ag-containing amorphous carbon films. Diamond & Related Materials 105 (2020), 107803.
  • Tillmann, W.; Fehr, A.; Wegner, J.; Stangier, D.; Kleszczynski, S.; Witt, G.: LPBF-M manufactured Zr-based bulk metallic glasses coated with magnetron sputtered ZrN films. Surface & Coatings Technology 386 (2020), 125463.
  • Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Krebs, E.; Biermann, D.: Tribological studies on multi-coated forming tools. Journal of Manufacturing Processes 49 (2020), S. 141 ‑ 152.
  • Tillmann, W.; Ulitzka, H.; Lopes Dias, N. F.; Stangier, D.; Thomann, C. A.; Moldenhauer, H.; Debus, J.: Effects of acetylene flow rate and bias voltage on the structural and tribo-mechanical properties of sputtered a-C:H films. Thin Solid Films 693 (2020), 137691.
  • Tillmann, W.; Wittig, A.; Stangier, D.; Moldenhauer, H.; Thomann, C.-A.; Debus, J.; Aurich, D.; Bruemmer, A.: Influence of the bias-voltage, the argon pressure and the heating power on the structure and the tribological properties of HiPIMS sputtered MoSx films. Surface & Coatings Technology 385 (2020), 125358.
  • Schneider, E.; Paulus, M.; Stangier, D.; Bauer, K.-H.; Tolan, M.: The surface structure of medical implants. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 16th DELTA User Meeting & Annual Report (2020), S. 69.
  • Tillmann, W.; Hagen, L.; Stangier, D.; Kokalj, D.; Lopes Dias, N. F.; Kensey, D.: Structural analysis of LBM 316L substrate PVD CrAlN coating composites. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 16th DELTA User Meeting & Annual Report (2020), S. 59 - 63.
  • Tillmann, W.; Paulus, M.; Hagen, L.; Kokalj, D.; Stangier, D.; Abdulgader, M.: X-ray diffraction study on cold sprayed Babbitt coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 16th DELTA User Meeting & Annual Report (2020), S. 55 - 57.
  • Tillmann, W.; Stangier, D.; Grisales, D.; Kokalj, D.; Hagen, L.; Latarius, J.; Sternemann, C.; Paulus, M.: Influence of the Deposition Technology on the Crystalline Structure of TiAlN PVD Coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 16th DELTA User Meeting & Annual Report (2020), S. 51 - 54.
  • Tillmann, W.; Stangier, D.; Kokalj, D.; Hagen, L.; Roese, P.; Shamout, P.; Schmitz, M.; Kesper, L.; Burkowitz, A.; Berges, U.; Westphal, C.: Influence of Sputtered Carbon on the Development of Amorphous Phases in CrAlCN DC/HiPIMS PVD Coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 16th DELTA User Meeting & Annual Report (2020), S. 35 - 38.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Hagen, L.; Kesper, L.; Berges, U.; Westphal, C.; Sternemann, C.; Paulus, M.: Structural analysis of TiN nanoparticle reinforced CrN thin films. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 16th DELTA User Meeting & Annual Report (2020), S. 29 - 32.
  • Aurich, D.; Heselmann, M.; Utri, M.; Brümmer, A.; Tillmann, W.; Wittig, A.; Stangier, D.; Thomann, C.-A.; Moldenhauer, H.; Debus, J.: Analysis oft he mechanical contact load of screw rotors using an isogeoemtric boundary element method. In: Tagungsband 61. Tribologie-Fachtagung 28.09 - 30.09., Göttingen, Deutschland, (2020), S. 81 - 90.

2019

  • Behrens, B.-A.; Biermann, D.; Menzel, A.; Tillmann, W.; Krimm, R.; Meijer, A.; Schewe, M.; Stangier, D.; Commichau, O.; Müller, P.; Rosenbusch, D.: Untersuchungen strukturierter Werkzeugflächen und der Einfluss auf den Werkzeugverschleiß. In: Merklein, M.; Behrens, B.-A.; Tekkaya, A. E. (Hrsg.): 4. Workshop Blechmassivumformung 2019 – DFG Transregio 73, Hannover 12.03.2019, S. 7 - 30.
  • Tillmann, W.; Wittig, A.; Stangier, D.; Thomann, C.-A.; Moldenhauer, H.; Debus, J.; Aurich, D.; Brümmer, A.: Investigation of the Tribofilm Formation of HiPIMS sputtered MoSx Thin Films in Different Environments by Raman Scattering. Lubricants 7 (2019), 100.
  • Tillmann, W.; Grisales, D.; Stangier, D.; Ben Jebara, I.; Kang, H.: Influence of the etching processes on the adhesion of TiAlN coatings deposited by DCMS, HiPIMS and hybrid techniques on heat treated AISI H11. Surface & Coatings Technology 378 (2019), 125075.
  • Tillmann, W.; Stangier, D.; Lopes Dias, N. F.; Gelinski, N.; Stanko, M.; Stommel, M.; Krebs, E.; Biermann, D.: Reduction of Ejection Forces in Injection Molding by Applying Mechanical Post-Treated CrN and CrAlN PVD Films. Journal of Manufacturing and Materials Processing 3 (2019), 88.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Schöppner, V.; Malatyali, H.: Combining Thermal Spraying and Magnetron Sputtering for the Development of Ni/Ni-20Cr Thin Film Thermocouples for Plastic Flat Film Extrusion Processes. Coatings 9 (2019), 603.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Gelinski, N.: Tribological Performance of PVD Film Systems Against Plastic Counterparts for Adhesion-Reducing Application in Injection Molds. Coatings 9 (2019), 588.
  • Wittig, A.; Thomann, A.; Moldenhauer, H.; Aurich, D.; Stangier, D.; Debus, J.; Brümmer, A.; Tillmann, W.: Analyse des tribologischen Verhaltens HiPIMS gesputterter MoSx Schichten mittels Raman-Spektroskopie für trockenlaufende unsynchronisierte Schraubenmaschinen. In: Tagungsband 60. Tribologie-Fachtagung, 23.09. - 25.09., Göttingen, Deutschland, (2019), S. 566 - 576.
  • Moldenhauer, H.; Wittig, A.; Kokalj, D.; Stangier, D.; Brümmer, A.; Tillmann, W.; Debus, J.: Resonant Raman scattering characterization of thermally annealed HiPIMS deposited MoSx coatings. Surface & Coatings Technology 377 (2019), 124891.
  • Tillmann, W.; Fehr, A.; Stangier, D.: Powder metallurgic fabricated plug targets for the synthesis of AlCrSiWN multicomponent coating systems. International Journal of Refractory Metals & Hard Materials 85 (2019), 105081.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Fu, Q.; Kruis, E.: Combination of an atmospheric pressured arc reactor and a magnetron sputter device for the synthesis of novel nanostructured thin films. Thin Solid Films 689 (2019), 137528.
  • Tillmann, W.; Grisales, D.; Stangier, D.; Butzke, T.: Tribomechanical behaviour of TiAlN und CrAlN coatings deposited onto AISI H11 with different pre-treatments. Coatings 9 (2019), 519.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Maus-Friedrichs, W.; Gustus, R.; Thomann, C. A.; Moldenhauer, H.; Debus, J.: Improved adhesion of a-C and a-C:H films with CrC interlayer on 16MnCr5 by HiPIMS-pretreatment. Surface & Coatings Technology 375 (2019) S. 877 - 887.
  • Tillmann, W.; Fehr, A.; Stangier, D.: Microstructural and tribological properties of sputtered AlCrSiWN films deposited with segmented powder metallurgic target materials. Thin Solid Films 687 (2019), 137465.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Schöppner, V.; Malatyali, H.: Effects of AlN and BCN Thin Film Multilayer Design on the Reaction Time of Ni/Ni-20Cr Thin Film Thermocouples on Thermally Sprayed Al2O3. Sensors 19 (2019), 3414.
  • Tillmann, W.; Hagen, L.; Stangier, D.; Paulus, M.; Tolan, M.; Sakrowski, R.; Biermann, D.; Freiburg, D.: Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. Surface & Coatings Technology 374 (2019), S. 448 - 459.
  • Tillmann, W.; Stangier, D.; Roese, P.; Shamout, K.; Berges, U.; Westphal, C.; Debus, J.: Structural and mechanical properties of carbon incorporation in DC/HiPIMS CrAlN coatings. Surface & Coatings Technology 374 (2019), S. 774 - 783.
  • Tillmann, W.; Hagen, L.; Stangier, D.; Krabiell, M.; Schröder, P.; Tiller, J.; Krumm, C.; Sternemann, C.; Paulus, M.; Elbers, M.: Influence of etching-pretreatment on nano-grained WC‑Co surfaces and properties of PVD/HVOF duplex coatings. Surface & Coatings Technology 374 (2019), S. 32 - 43.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Bayer, M.; Moldenhauer, H.; Debus, J.; Schmitz, M.; Berges, U.; Westphal, C.: Interaction effects of cathode power, bias voltage, and mid-frequency on the structural and mechanical properties of sputtered amorphous carbon films. Applied Surface Science 487 (2019), S. 857 - 867.
  • Tillmann, W.; Fehr, A.; Stangier, D.; Dildrop, M.; Homberg, W.; Lossen, B.; Hijazi, D.: Al2O3/ ZrO2-8Y2O3 and (Cr,Ti)AlSiN tool coatings to influence the temperature and surface quality in friction-spinning process. Production Engineering 13 (2019), S. 449 - 457.
  • Nienhaus, A.; Bräuer, G.; Paschke, H.; Stangier, D.; Tillmann, W.; Paulus, M.; Sternemann, C.: Nanocomposite PECVD multiphase coatings for wear reduction under thermal load conditions. In: Clausthaler Zentrum für Materialtechnik (Hrsg.): Tagungsband 3. Niedersächsisches Symposium Materialtechnik (2019), S. 511 - 521.
  • Tillmann, W.; Fehr, A.; Stangier, D.; Dildrop, M.: Influences of substrate pretreatments and Ti/Cr interlayers on the adhesion and hardness of CrAlSiN and TiAlSiN films deposited on Al2O3 and ZrO2-8Y2O3 thermal barrier coatings. Results in Physics 12 (2019), S. 2206 - 2212.
  • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the material flow in sheet-bulk metal forming using modifications of the tool surface. International Journal of Material Forming 12 (2019), S. 17 - 26.
  • Tillmann, W.; Kokalj, D.; Stangier, D.: Influence of the deposition parameters on the texture and mechanical properties of magnetron sputtered cubic MoNx thin films. Materialia 5 (2019), 100186.
  • Jung, O.; Smeets, R.; Hartjen, P.; Schnettler, R.; Feyerabend, F.; Klein, M.; Wegner, N.; Walter, F.; Stangier, D.; Henningsen, A.; Rendenbach, C.; Heiland, M.; Barbeck, M.; Kopp, A.: Improved In Vitro Test Procedure for Full Assessment of the Cyctocompatibility of Degradable Magnesium Based on ISO 10993-5/-12. International Journal of Molecular Sciences 20 (2019), 255.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.: Investigation of the tribo-mechanical properties of sputtered a-C:Si films using design of experiments. Diamond & Related Materials 91 (2019), S. 127 - 137.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.: Influence of plasma nitriding pretreatments on the tribo-mechanical properties of DLC coatings sputtered on AISI H11. Surface & Coatings Technology 357 (2019), S. 1027 - 1036.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Tolan, M.; Paulus, M.: Structure and mechanical properties of hafnium nitride films deposited by direct current, mid-frequency, and high-power impulse magnetron sputtering. Thin Solid Films 669 (2019), S. 65 - 71.
  • Tillmann, W.; Grisales, D.; Stangier, D.: Effects of AISI H11 surface integrity on the residual stresses and adhesion of TiAlN/substrate compounds. Surface & Coatings Technology 357 (2019), S. 466 - 472.
  • Tillmann, W.; Hagen, L.; Abdulgader, M.; Kokalj, D.; Stangier, D.; Paulus, M.; Tolan, M.: Studying the feasibility of depositing alumina reinforced Sn-Sb-Cu based composite coatings by means of low pressure cold spraying. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 15th DELTA User Meeting & Annual Report (2019), S. 43 - 45.
  • Latarius, J.; Stangier, D.; Berger, K.; Forov, J.; Weis, C.; Paulus, M.; Tillmann, W.; Tolan, M.: Influence of bias potential on texture and thermal resilience of CrAl(Si)N coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 15th DELTA User Meeting & Annual Report (2019), S. 41 - 42.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.; Bayer, M.; Moldenhauer, H.; Debus, J.; Schmitz, M.; Berges, U.; Westphal, C.: Interaction effects of cathode power, bias voltage, and mid-frequency on the structural and mechanical properties of sputtered amorphous carbon films. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 15th DELTA User Meeting & Annual Report (2019), S. 31.

2018

  • Tillmann, W.; Kokalj, D.; Stangier, D.; Schöppner, V.; Bayazian Benis, H.; Malatyali, H.: Influence of Cr-Content on the thermoelectric and mechanical properties of NiCr thin film thermocouples synthesized on thermally sprayed Al2O3. Thin Solid Films 663 (2018), S. 148 - 158.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.: Effect of Hf on the microstructure, mechanical properties, and oxidation behavior of sputtered CrAlN films. Vacuum 154 (2018), S. 208 - 213.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Hagen L.: Tribological characteristics of newly developed PVD and Thermal Spray hard coatings at elevated temperatures. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 14th DELTA User Meeting & Annual Report (2018), S. 109 - 111.
  • Latarius, J.; Stangier, D.; Albers, C.; Berger, K.; Sparenberg, A.; Paulus, M.; Tillmann, W.; Tolan, M.: Temperature dependent behaviour of chromium nitride-based coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 14th DELTA User Meeting & Annual Report (2018), S. 103 - 104.
  • Tillmann, W.; Stangier, D.; Roese, P.; Shamout, K.; Berges, U.; Westphal, C.: XPS measurements of CrAlCN DC/HiPIMS PVD coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 14th DELTA User Meeting & Annual Report (2018), S. 35 - 37.
  • Tillmann, W.; Kokalj, D.; Stangier, D.: Optimization of the deposition parameters of Ni-20Cr thin films on thermally sprayed Al2O3 for sensor application. Surface & Coatings Technology 344 (2018), S. 223 - 232.
  • Tillmann, W.; Fehr, A.; Ferreira, M.; Stangier, D.: An examination of interactions between temperature, pressure, sintering time, and Si/W ratio on the sintering behavior of CrSiW. International Journal of Refractory Metals & Hard Materials 73 (2018), S. 146 - 156.
  • Krebs, E.; Wolf, M.; Biermann, D.; Tillmann, W.; Stangier, D.: High-quality cutting edge preparation of micromilling tools using wet abrasive jet machining process. Production Engineering 12 (2018), S. 45 - 51.
  • Tillmann, W.; Lopes Dias, N. F., Stangier, D.: Tribo-mechanical properties of CrC/a-C thin films sequentially deposited by HiPIMS and mfMS. Surface & Coatings Technology 335 (2018), S. 173 - 180.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Paulus, M.; Sternemann, C.; Tolan, M.: Investigation on the oxidation behavior of AlCrVxN thin films by means of synchrotron radiation and influence on the high temperature friction. Applied Surface Science 427 (2018), S. 511 - 521.

2017

  • Breternitz, P.; Stangier, D.; Tillmann, W.: Friesische Halbsceattas – Werkstoffkundliche und historische Überlegungen. Jaarboek voor Munt- en Peeningkunde 104 (2017), S. 1 - 22.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Hagen, L.; Sternemann, C.; Paulus, M.; Tolan, M.: An Examination on the temperature dependency of Vanadium doped low friction wear resistant PVD coatings.  In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 13th DELTA User Meeting & Annual Report (2017), S. 95 - 100.
  • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A. E.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Improvement strategies for the formfilling in incremental gear forming processes. Production Engineering 11 (2017), S. 623 - 631.
  • Tillmann, W.; Pinho Ferreira, M.; Stangier, D.; Fehr, A.: Investigation of Sintering Parameters Affecting Densification and Diffusion of CrSiW for the Use as Sputter Material. In: Proceedings EURO PM 2017: International Powder Metallurgy Congress and Exhibition, Milan Italy, 1-5 October 2017.
  • Tillmann, W.; Stangier, D.; Hagen, L.; Schröder, P.; Krabiell, M.: Influence of the WC grain size on the properties of PVD/HVOF duplex coatings. Surface & Coatings Technology 328 (2017), S. 326 - 334.
  • Tillmann, W.; Stangier, D.; Lopes Dias, N. F.: Influence of PVD-duplex-treated, Bionic Surface Structures on the Wetting Behavior for Sheet-Bulk Metal Forming Tools. Journal of Bionic Engineering, 14 (2017), S. 520 - 531.
  • Tillmann, W.; Kokalj, D., Stangier, D.; Paulus, M.; Sternemann, C.; Tolan, M.: Investigation of the influence of the vanadium content on the high temperature tribo-mechanical properties of DC magnetron sputtered AlCrVN thin films. Surface & Coatings Technology 328 (2017), S. 172 - 181.
  • Tillmann, W.; Stangier, D.; Lopes-Dias, N.-F.; Biermann, D.; Krebs, E.: Adjustment of friction by duplex-treated, bionic structures for Sheet-Bulk Metal Forming. Tribology International 111 (2017), S. 9 - 17.
  • Tillmann, W.; Dildrop, M.; Grisales Pareja, D.; Stangier, D.: PVD-Nanokompositschichtsysteme für thermomechanisch hochbelastete Zerspanungswerkzeuge. In: Biermann, D. (Hrsg.): Spanende Fertigung 7. Ausgabe (2017), S. 229 - 238.

2016

  • Tillmann, W.; Tolan, M.; Pinho Ferreira, M.; Paulus, M.; Becke, M.; Stangier, D.: X-ray diffraction (XRD)-studies on the temperature dependent interface reactions on hafnium, zirconium and nickel coated monocrystalline diamonds used in grinding segments for stone and concrete machining. Material Science and Engineering Technology 47 (2016), S. 1193 - 1201.
  • Tillmann, W.; Stangier, D.; Schröder, P.: Investigation and optimization of the tribo-mechanical properties of CrAlCN coatings using Design of Experiments. Surface & Coatings Technology 308 (2016), S. 147 - 157.
  • Löffler, M.; Andreas, K.; Engel, U.; Schulte, R.; Groebel, D.; Krebs, E.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Weikert, T.; Wartzack, S.; Tremmel, S.; Lucas, H.; Denkena B.; Merklein, M.: Tribological measures for controlling material flow in sheet-bulk metal forming. Production Engineering 10 (2016), S. 459 - 470.
  • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A. E.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Wear behavior of tribologically optimized tool surfaces for incremental forming process. Tribology International 104 (2016), S. 64 - 72.
  • Tillmann, W.; Stangier, D.; Laemmerhirt, I.-A; Biermann, D.; Freiburg, D.: Investigation of the tribological properties of high-feed milled structures and Cr-based hard PVD-coatings. Vacuum 131 (2016), S. 5 - 13.
  • Tillmann, W.; Stangier, D.; Denkena, B.; Grove, T.; Lucas, H.: Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools. Production Engineering 10 (2016), S. 17 - 24.
  • Löffler, M.; Andreas, K.; Engel, U.; Weikert, T.; Tremmel, S.; Wartzack, S.; Stangier, D.; Tillmann, W.; Merklein, M.: Surface modifications for adaption of tribological conditions in sheet-bulk metal forming processes. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H. J.; Merklein, M. (Hrsg.): 12th International Conference The”A” Coatings (2016), S. 13 - 20.
  • Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.: Influence of PVD-coating manufacturing steps on the subsurface integrity of hardened and soft AISI M3:2 high speed steel. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H. J.; Merklein, M. (Hrsg.): 12th International Conference THe”A” Coatings (2016), S. 23 - 30.
  • Tillmann, W.; Hagen, L.; Kokalj, D.; Stangier, D.; Paulus, M.; Tolan, M.: Temperature-induced Formation of Lubricous Oxides in Vanadium-doped Arc-Sprayed Coatings. In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D.: 12th DELTA User Meeting & Annual Report (2016), S. 55 - 58.
  • Kersting, P.; Gröbel, D.; Merklein, M.; Sieczkarek, P.; Wernicke, S.; Tekkaya, A.E.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; Löffler, M.; Beyer, F.; Willner, K.: Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming. Production Engineering 10 (2016), S. 37 - 50.

2015

  • Tillmann, W.; Stangier, D.; Hagen, L.; Biermann, D.; Kersting, P.; Krebs, E.: Tribological investigation of bionic and micro-structured functional surfaces. Materialwissenschaft und Werkstofftechnik 46 (2015), S. 1096 - 1104.
  • Tillmann, W.; Hagen, L.; Stangier, D.; Laemmerhirt, I.-A.; Biermann, D.; Kersting, P.; Krebs, E.: Wear behavior of bio-inspired and technologically structured HVOF sprayed NiCrBSiFe coatings. Surface & Coatings Technology 280 (2015), S. 16 - 26.
  • Biermann, D.; Freiburg, D.; Hense, R.; Tillmann, W.; Stangier, D.: Influence of surface modifications on friction, using high-feed milling and wear resistant PVD-coatings for sheet-metal forming tools. Key Engineering Materials 639 (2015), S. 275 - 282.
  • Löffler, M.; Freiburg, D.; Gröbel, D.; Loderer, A.; Matthias, S.; Stangier, D.; Weikert, T. (2015): Untersuchung von Tailored Surfaces hinsichtlich ihres tribologischen Einflusses auf Prozesse der Blechmassivumformung. In: Tekkaya, A.E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Hrsg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung (2015), S. 131 - 146.
  • Behrens, B.-A.; Vucetic, M.; Hübner, S.; M.; Koch, S.; Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.; Hausotte, T.; Loderer, A.: Prozessauslegung und Untersuchung von geschliffenen und CrAlN / CrAlCN-beschichteten Werkzeugoberflächen mittels schwingungsüberlagertem Flachstauchversuch für die Blechmassivumformung. In: Tekkaya, A.E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Hrsg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung (2015), S. 173 - 192.

2014

  • Tillmann, W.; Stangier, D.; Hollingsworth, P.; Baumann, I.: Investigation of the influence of path planning and robot dynamics on near net-shape coatings. Thermal Spray Bulletin 66 (2014), S. 60 - 67.

2013

  • Tillmann, W.; Hollingsworth, P; Baumann, I.; Stangier, D.: Near-Net-Shape Coatings Manufactured by Means of Thermal Spraying: Influence of path strategy and robot dynamics. In: Tillmann, W. (Hrsg.): SFB 708 - 6. öffentliches Kolloquium (2013), S. 21 - 31.
  • Vierzigmann, U.; Schneider, T.; Koch, J.; Groebel, D.; Merklein, M.; Engel, U.; Hense, R.; Biermann, D.; Krebs, E.; Kersting, P.; Lucas, H.; Denkena, B.; Herper, J.; Stangier, D.; Tillmann, W.: Untersuchung von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch. In: Merklein, M.; Behrens, B.-A.; Tekkaya, A.E. (Hrsg.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung (2013), S. 137 - 162.

 

Zum Seitenanfang

Kalender

Zur Veranstaltungsübersicht

Mensapläne

Anfahrt & Lageplan

Der Campus der Technischen Universität Dortmund liegt in der Nähe des Autobahnkreuzes Dortmund West, wo die Sauerlandlinie A45 den Ruhrschnellweg B1/A40 kreuzt. Die Abfahrt Dortmund-Eichlinghofen auf der A45 führt zum Campus Süd, die Abfahrt Dortmund-Dorstfeld auf der A40 zum Campus-Nord. An beiden Ausfahrten ist die Universität ausgeschildert.

Direkt auf dem Campus Nord befindet sich die S-Bahn-Station „Dortmund Universität“. Von dort fährt die S-Bahn-Linie S1 im 20- oder 30-Minuten-Takt zum Hauptbahnhof Dortmund und in der Gegenrichtung zum Hauptbahnhof Düsseldorf über Bochum, Essen und Duisburg. Außerdem ist die Universität mit den Buslinien 445, 447 und 462 zu erreichen. Eine Fahrplanauskunft findet sich auf der Homepage des Verkehrsverbundes Rhein-Ruhr, außerdem bieten die DSW21 einen interaktiven Liniennetzplan an.
 

Zu den Wahrzeichen der TU Dortmund gehört die H-Bahn. Linie 1 verkehrt im 10-Minuten-Takt zwischen Dortmund Eichlinghofen und dem Technologiezentrum über Campus Süd und Dortmund Universität S, Linie 2 pendelt im 5-Minuten-Takt zwischen Campus Nord und Campus Süd. Diese Strecke legt sie in zwei Minuten zurück.

Vom Flughafen Dortmund aus gelangt man mit dem AirportExpress innerhalb von gut 20 Minuten zum Dortmunder Hauptbahnhof und von dort mit der S-Bahn zur Universität. Ein größeres Angebot an internationalen Flugverbindungen bietet der etwa 60 Kilometer entfernte Flughafen Düsseldorf, der direkt mit der S-Bahn vom Bahnhof der Universität zu erreichen ist.

Die Einrichtungen der Technischen Universität Dortmund verteilen sich auf den größeren Campus Nord und den kleineren Campus Süd. Zudem befinden sich einige Bereiche der Hochschule im angrenzenden Technologiepark. Genauere Informationen können Sie den Lageplänen entnehmen.