Sprungmarken

Servicenavigation

Hauptnavigation

Sie sind hier:

Hauptinhalt

Publikationen

Veröffentlichungen

2019

  • Wittig, A.; Thomann, A.; Moldenhauer, H.; Aurich, D.; Stangier, D.; Debus, J.; Brümmer, A.; Tillmann, W.: Investigation of the tribological behavior of MoSx thin films using Raman scattering for the application in dry-running screw machines. 60. Tribologie-Fachtagung – Reibung, Schmierung und Verschleiß, 2019, 76-1.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Schöppner, V.; Malatyali, H.: Combining Thermal Spraying and Magnetron Sputtering for the Development of Ni/Ni-20Cr Thin Film Thermocouples for Plastic Flat Film Extrusion Processes. Coatings, 9(10) (2019), 603.
  • Tillmann, W.; Lopes Dias, N.F.; Stangier, D.; Gelinski, N.: Tribological Performance of PVD Film Systems Against Plastic Counterparts for Adhesion-Reducing Application in Injection Molds. Coatings, 9(9) (2019), 588.
  • Tillmann, W.; Fehr, A.; Stangier, D.: Powder metallurgic fabricated plug targets for the synthesis of AlCrSiWN multicomponent coating systems. International Journal of Refractory Metals and Hard Materials, 85 (2019), 105081.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Fu, Q.; Kruis, E.; Combination of an atmospheric pressured arc reactor and a magnetron sputter device for the synthesis of novel nanostructured thin films. Thin Solid Films, 689 (2019), 137528.
  • Moldenhauer, H.; Wittig, A.; Kokalj, D.; Stangier, D.; Brümmer, A.; Tillmann, W.; Debus, J.: Resonant Raman scattering characterization of thermally annealed HiPIMS deposited MoSx coatings. Surface and Coatings Technology, 377 (2019), 124891.
  • Tillmann, W.; Grisales, D.; Stangier, D.: Tribomechanical Behaviour of TiAlN and CrAlN Coatings Deposited onto AISI H11 with Different Pre-Treatments. Coatings, 9 (2019), 519.
  • Tillmann, W.; Lopes Dias, N.F.; Stangier, D.; Maus-Friedrichs, W.; Gustus, R.; Thomann, C.A.; Moldenhauer, H.; Debus, J.: Improved adhesion of a-C and a-C:H films with a CrC interlayer on 16MnCr5 by HiPIMS-pretreatment. Surface and Coatings Technology, 375 (2019), 877-887.
  • Tillmann, W.; Fehr, A.; Stangier, D.: Microstructural and tribological properties of sputtered AlCrSiWN films deposited with segmented powder metallurgic target materials. Thin Solid Films, 687 (2019), 137465.
  • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the material flow in sheet-bulk metal forming using modifications of the tool surface. International Journal of Material Forming 12 (2019), S. 17-26.
  • Jung, O.; Smeets, R.; Hartjan, P.; Schnettler, R.; Feyerabend, F.; Klein, M.; Wegner, N.; Walter, F.; Stangier, D.; Henningsen, A.; Rendenbach, C.; Heiland, M.; Barbeck, M.; Kopp, A.: Improved in vitro test procedure for full assessment of the cyctocompatibility of degradable magnesium based on ISO 10993-5/-12. International Journal of Molecular Sciences 20 (2019), S. 255-274.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Schöppner, V.; Malatyali, H.: Effects of AlN and BCN Thin Film Multilayer Design on the Reaction Time of Ni/Ni-20Cr Thin Film Thermocouples on Thermally Sprayed Al2O3. Sensors 19 (2019), 3414.
  • Tillmann, W.; Stangier, D.; Roese, P.; Shamout, K.; Berges, U.; Westphal, C.; Debus, J.: Structural and mechanical properties of carbon incorporation in DC/HiPIMS CrAlN coatings. Surface and Coatings Technology, 374 (2019) 774-783.
  • Tillmann, W.; Hagen, L.; Stangier, D.; Krabiell, M.; Schröder, P.; Tiller, J.; Krumm, C.; Sternemann, C.; Paulus, M.; Elbers, M.: Influence of etching-pretreatment on nano-grained WC Co surfaces and properties of PVD/HVOF duplex coatings. Surface and Coatings Technology 374 (2019) 32-43.
  • Tillmann, W.; Lopes Dias, N.F.; Stangier, D.; Bayer, M.; Moldenhauer, H.; Debus J.; Schmitz, M.; Berges, U.; Westphal, C.: Interaction effects of cathode power, bias voltage, and mid-frequency on the structural and mechanical properties of sputtered amorphous carbon films. Applied Surface Science, 487 (2019) 857-867.
  • Momeni, S.; Tillmann, W.: Influence of Ag on antibacterial performance, microstructure and phase transformation of NiTi shape memory alloy coatings. Vacuum, 164 (2019) 242-245.
  • Tillmann, W.; Fehr, A.; Stangier, D.; Dildrop, M.; Homberg, W.; Lossen, B.; Hijazi, D.: Al2O3/ ZrO2-8Y2O3 and (Cr,Ti)AlSiN Tool Coatings to influence the temperature and surface quality in friction-spinning process. Production Engineering, 13 (2019) 449-457.
  • Nienhaus, A.; Bräuer, G.; Paschke, H.; Stangier, D.; Tillmann, W.; Paulus, M.; Sternemann, C.: Nanocomposite PECVD multiphase coatings for wear reduction under thermal load conditions. In: Clausthaler Zentrum für Materialtechnik (Hrsg.): 3. Niedersächsisches Symposium Materialtechnik, (2019) 511-521.
  • Tillmann, W.; Fehr, A.; Stangier, D.; Dildrop, M.: Influences of substrate pretreatments and Ti/Cr interlayers on the adhesion and hardness of CrAlSiN and TiAlSiN films deposited on Al2O3 and ZrO2-8Y2O3 thermal barrier coatings. Results in Physics, 12 (2019) 2206-2212.
  • Tillmann, W.; Lopes Dias, N. F.; Stangier, D.: Investigation of the Tribo-Mechanical Properties of Sputtered a-C:Si Films Using Design of Experiments. In: Diamond & Related Materials, 91 (2019) 127-137.
  • Tillmann, W.; Lopes Dias, N.F.; Stangier, D. Tolan, M.; Paulus, M.: Structural and Mechanical Properties of Hafnium Nitride Films Deposited by Direct Current, Mid-Frequency, and High Power Impulse Magnetron Sputtering. Thin Solid Films, 357 (2019) 466-472.
  • Tillmann, W.; Kokalj, D.; Stangier, D.: Influence of the deposition parameters on the texture and mechanical properties of magnetron sputtered cubic MoNx thin films. Materialia, 5 (2019) 100186.
  • Tillmann, W.; Lopes Dias, N.F.; Stangier, D.: Influence of Plasma Nitriding Pretreatments on the Tribo-Mechanical Properties of DLC Coatings Sputtered on AISI H11. Surface & Coatings Technology 357 (2019) 1027-1036.
  • Tillmann, W.; Grisales, D.; Stangier, D.: Effects of AISI H11 surface integrity on the residual stresses and adhesion of TiAlN/Substrate compounds. Surface & Coatings Technology, 357 (2019) 466-472.

2018

  • Tillmann, W.; Kokalj, D.; Stangier, D.; Hagen L.: Tribological characteristics of newly developed PVD and Thermal Spray hard coatings at elevated temperatures. 14th DELTA User Meeting & Annual Report (2018), S. 109-112.
  • Latarius, J.; Stangier, D.; Albers, C.; Berger, K.; Sparenberg, A.; Paulus, M.; Tillmann, W.; Tolan, M.: Temperature dependet behaviour of chromium nitride based coatings. 14th DELTA User Meeting & Annual Report (2018), S. 103-104.
  • Tillmann, W.; Stangier, D.; Roese, P.; Shamout, K.; Berges, U.; Westphal, C.: XPS measurements of CrAlCN DC/HiPIMS PVD coatings. 14th DELTA User Meeting & Annual Report (2018), S. 35-38.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Schöppner, V.; Bayazian Benis, H.; Malatyali, H.: Influence of Cr-Content on the thermoelectric and mechanical properties of NiCr thin film thermocouples synthesized on thermally sprayed Al2O3. Thin Solid Films, 663 (2018) 148-158.
  • Tillmann, W.; Kokalj, D.; Stangier, D.: Optimization of the deposition parameters of Ni-20Cr thin films on thermally sprayed Al2O3 for sensor application. Surface and Coatings Technology, 344 (2018) 223-232.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Hagen L.: Tribological characteristics of newly developed PVD and Thermal Spray hard coatings at elevated temperatures. 14th DELTA User Meeting & Annual Report, (2018) 109-112.
  • Latarius, J.; Stangier, D.; Albers, C.; Berger, K.; Sparenberg, A.; Paulus, M.; Tillmann, W.; Tolan, M.: Temperature depended behaviour of chromium nitride based coatings. 14th DELTA User Meeting & Annual Report, (2018) 103-104.
  • Tillmann, W.; Stangier, D.; Roese, P.; Shamout, K.; Berges, U.; Westphal, C.: XPS measurements of CrAlCN DC/HiPIMS PVD coatings. 14th DELTA User Meeting & Annual Report, (2018) 35-38.
  • Tillmann, W.; Lopes Dias, N.F.; Stangier, D.: Effect of Hf on the microstructure, mechanical properties, and oxidation behavior of sputtered CrAlN films. Vacuum, 154 (2018) 208-213.
  • Tillmann, W.; Lopes Dias, N.F., Stangier, D.: Tribo-mechanical properties of CrC/a-C thin films sequentially deposited by HiPIMS and mfMS. Surface and Coatings Technology, 335 (2018) 173-180.
  • Tillmann, W.; Fehr, A.; Ferreira, M.; Stangier, D.: An examination of interactions between temperature, pressure, sintering time, and Si/W ratio on the sintering behavior of CrSiW. International Journal of Refractory Metals and Hard Materials, 73 (2018) 146-156.
  • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the material flow in sheet-bulk metal forming using modifications of the tool surface. In: International Journal of Material Forming, 12 (2018) 17-26.
  • Tillmann, W.; Kokalj, D.; Stangier, D.; Paulus, M.; Sternemann, C.; Tolan, M.: Investigation on the oxidation behavior of AlCrVxN thin films by means of synchrotron radiation and influence on the high temperature friction. Applied Surface Science, 427 (2018) 511-521.
  • Krebs, E.; Wolf, M.; Biermann, D.; Tillmann, W.; Stangier, D.: High-quality cutting edge preparation of micromilling tools using wet abrasive jet machining process. Production Engineering, 12 (2018) 45-51.

2017

  • Löffler, M.; Andreas, K.; Engel, U.; Groebel, D.; Krebs, E.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Weikert, T.; Wartzack, S.; Tremmel, S.; Lucas, H.; Denkena B.; Merklein, M.: Tribological measures for controlling the material flow in sheet-bulk metal forming. Production Engineering 10 (2016), S. 459-470.
  • Breternitz, P.; Tillmann, W.; Stangier, D.: Friesische Halbsceattas – Werkstoffkundliche und historische Überlegungen. In: Jaarboek voor Munt- en Peeningkunde 104 (2017), S. 1-22.
  • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Improvement strategies for the formfilling in incremental gear forming processes. Production Engineering, 11(2017) 623-631.
  • Tillmann, W.; Stangier, D.; Hagen, L.; Schröder, P. Krabiell, M.: Influence of WC grain size on the properties of PVD/HVOF duplex coatings. Surface and Coatings Technology 328 (2017) 326-334.
  • Tillmann, W.; Kokalj, D., Stangier, D.; Paulus, M.; Sternemann, C.; Tolan, M.: Investigation of the influence of the vanadium content on the high temperature tribo-mechanical properties of DC magnetron sputtered AlCrVN thin films. Surface and Coatings Technology, 328 (2017) 172-181.
  • Tillmann, W.; Stangier, D.; Lopes Dias, N.F.; Biermann, D.; Krebs, E.: Adjustment of Friction by Duplex-Treated, Bionic Structures for Sheet-Bulk Metal Forming. Tribology International, 111 (2017), 9-17.
  • Tillmann, W.; Dildrop, M.: Einfluss der Biasspannung und des Sputtermodus auf die Schichteigenschaften von TiAlSiN. Materialwissenschaft und Werkstofftechnik, 48 (2017) 855-861.
  • Tillmann, W.; Dildrop, M.; Grisales Pareja, D.; Stangier, D.: PVD-Nanokompositschichtsysteme für thermomechanisch hochbelastete Zerspanungswerkzeuge. In: Biermann, D. (Hrsg.): Spanende Fertigung, 7. Ausgabe (2017) 229-238.
  • Tillmann, W.; Pinho Ferreira, M.; Stangier, D.; Fehr, A.: Investigation of Sintering Parameters Affecting Densification and Diffusion of CrSiW for the Use as Sputter Material. EURO PM Proceedings (2017).
  • Momeni, S.; Biskupek, J.; Tillmann, W.; Tailoring microstructure, mechanical and tribological properties of NiTi thin films by controlling in-situ annealing temperature. Thin Solid Films, 628 (2017) 13-21.
  • Tillmann, W.; Dildrop, M.: Influence of Si content on mechanical and tribological properties of TiAlSiN PVD coatings at elevated temperatures. Surface and Coatings Technology, 321 (2017) 448-454.
  • Tillmann, W.; Stangier, D.; Lopes Dias, N.F.: Influence of PVD-Duplex-Treated, Bionic Surface Structures on the Wetting Behavior for Sheet-Bulk Metal Forming Tools. Journal of Bionic Engineering, 14 (2017) 520-531.

2016

  • Tillmann, W.; Momeni, S.: Investigation of the self-healing sliding wear characteristics of NiTi-based PVD coatings on tool steel. Wear, 368-369 (2016) 53-59.
  • Tillmann, W.; Momeni, S.: Composite cavitation resistant PVD coatings based on NiTi thin films, Materials & Design, 110 (2016) 830-838.
  • Tillmann, W.; Stangier, D.; Laemmerhirt, I.-A.; Biermann, D.; Freiburg, D.: Investigation of the tribological properties of high-feed milled structures and Cr-based hard PVD-coatings. Vacuum, 131 (2016) 5-13.
  • Tillmann, W.; Hagen, L.; Hoffmann, F.; Dildrop, M.; Wibbeke, A.; Schöppner, V.; Resonnek, V.; Pohl, M.; Krumm, C.; Tiller, J.C.; Paulus, M.; Sternemann, C.: The detachment behavior of polycarbonate on thin films above the glass transition temperature. Polymer Engineering and Science, 56 (2016) 786-797.
  • Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.: Influence of PVD-coating manufacturing steps on the subsurface integrity of hardened and soft AISI M3:2 high speed steel. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Hrsg.): Proceedings THE "A" Coatings, (2016), 23-30.
  • Löffler, M.; Andreas, K.; Engel, U.; Weikert, T.; Tremmel, S.; Wartzack, S.; Stangier, D.; Tillmann, W.; Merklein, M.: Surface modifications for adaption of tribological conditions in sheet-bulk metal forming processes. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Hrsg.): Proceedings THE "A" Coatings, (2016) 13-20.
  • Tillmann, W.; Stangier, D.; Schröder, P.: Investigation and Optimization of the tribo-mechanical Properties of CrAlCN Coatings using Design of Experiments. Surface and Coatings Technology, 308 (2016) 147-157.
  • Tillmann, W.; Momeni, S.: Tribological development of TiCN coatings by adjusting the flowing rate of reactive gases. Journal of Physics and Chemistry of Solids, 90 (2016) 45-53.
  • Löffler, M.; Andreas, K.; Engel, U.; Groebel, D.; Krebs, E.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Weikert, T.; Wartzack, S.; Tremmel, S.; Lucas, H.; Denkena B.; Merklein, M.: Tribological measures for controlling the material flow in sheet-bulk metal forming. Production Engineering, 10 (2016) 459-470.
  • Wiederkehr (geb. Kersting), P.; Gröbel, D.; Merklein, M.; Sieczkarek, P.; Wernicke, S.; Tekkaya, A.E.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; Löffler, M.; Beyer, F.; Willner, K.: Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming. Production Engineering, 10 (2016) 37-50.
  • Tillmann, W.; Stangier, D.; Denkena, B.; Grove, T.; Lucas, H.: Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools. Production Engineering, 10 (2016) 17-24.
  • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Wear Behavior of Tribologically Optimized Tool Surfaces for Incremental Forming Processes. Tribology International, 104 (2016), 64-72.

2015

  • Tillmann, W.; Stangier, D.; Biermann, D.; Krebs, E.; Hagen, L.: Tribologische Untersuchung bionischer und mikrostrukturierter Funktionsflächen. Materialwissenschaft und Werkstofftechnik, 46 (2015) 1096-1104.
  • Freiburg, D.; Biermann, D.; Hense, R.; Tillmann, W.; Stangier, D.: Influence of Surface Modifications on Friction, Using High-Feed Milling and Wear Resistant PVD-Coating for Sheet-Metal Forming Tools. Key Engineering Materials, 639 (2015) 275-282.
  • Tillmann, W.; Momeni, S.: Influence of in-situ and postannealing technique on tribological performance of NiTi SMA thin films. Surface and Coatings Technology, 276 (2015) 286-295.
  • Tillmann, W.; Momeni, S.: Comparison of NiTi thin films sputtered from separate elemental targets and Ti-rich alloy targets. Journal of Materials Processing Technology, 220 (2015) 184-190.
  • Tillmann, W.; Momeni, S.: Tribological performance of near equiatomic and Ti-rich NiTi shape memory alloy thin films. Acta Materialia, 92 (2015) 189-196.
  • Behrens, B.; Hübner, S.; Vucetic, M.; Koch, S.; Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.; Hausotte, T.; Loderer, A.: Prozessauslegung und Untersuchung von geschliffenen und CrAlN / CrAlCN-beschichteten Werkzeugoberflächen mittels schwingungsüberlagertem Flachstauchversuch für die Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Hrsg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015) 173-192.
  • Löffler, M.; Freiburg, D.; Gröbel, D.; Loderer, A.; Matthias, S.; Stangier, D.; Weikert, T.: Untersuchung von Tailored Surfaces hinsichtlich ihres tribologischen Einflusses auf Prozesse der Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Hrsg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015) 131-146.
  • Tillmann, W.; Momeni, S.: In-situ annealing of NiTi thin films at different temperatures. Sensors and Actuators A: Physical, 221 (2015) 9-14.

2014

  • Tillmann, W.; Dildrop, M.; Sprute, T.: Influence of nitriding parameters on the tribological properties and the adhesion of Ti- and Cr-based multilayer designs. Surface and Coatings Technology, 260 (2014) 380-385.
  • Sprute, T.; Tillmann, W.; Grisales, D.; Selvadurai, U.; Fischer, G.: Influence of substrate pre-treatments on residual stresses and tribo-mechanical properties of TiAlN-based PVD coatings. Surface and Coatings Technology, 260 (2014) 369-379.
  • Tillmann, W.; Momeni, S.: Deposition of superelastic composite NiTi based films. Vacuum, 104 (2014) 41-46.
  • Al-Bukhaiti, M.A.; Al-hatab, K.A.; Tillmann, W.; Momeni, S.; Hoffmann, F.: Tribological and mechanical properties of Ti/TiAlN/TiAlCN nanoscale multilayer PVD coatings deposited on AISI H11 hot work tool steel. Applied Surface Science, 318 (2014) 180-190.
  • Fischer, G.; Selvadurai, U.; Nellesen, J.; Sprute, T.; Tillmann, W.: Analysis of stress gradients in physical vapour deposition multilayers by X‐ray diffraction at fixed depth intervals. Journal of Applied Crystallography, 47 (2014) 335-345.
  • Selvadurai, U.; Tillmann, W.; Fischer, G.; Sprute, T.: The Influence of Multilayer Design on Residual Stress Gradients in Ti/TiAlN Systems. Materials Science Forum, 768-769 (2014) 264-271.

2013

  • Tillmann, W.; Momeni, S.; Hoffmann, F.: A study of mechanical and tribological properties of self-lubricating TiAlVN coatings at elevated temperatures, Tribology International, 66 (2013) 324-329.
  • Tillmann, W.; Hoffmann, F.; Sprute, T.; Chang, Y.-Y.; Tsai, C.-Y.: Influence of bias voltage on residual stresses and tribological properties of TiAlVN-coatings at elevated temperatures, 231 (2013) 122-125.
  • Chang, Y.-Y.; Cheng, C.-M.; Liou, Y.-Y.; Tillmann, W.; Hoffmann, F.; Sprute, T.: High temperature wettability of multicomponent CrAlSiN and TiAlSiN coatings by molten glass. Surface and Coatings Technology, 231 (2013) 24-28.
  • Tillmann, W.; Herper, J.; Laemmerhirt, I.-A.: Tribological comparison of different surface topographies coated with chromium aluminium nitride. Materialwissenschaft und Werkstofftechnik. 44 (2013) 730-735.
  • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Tillmann, W.; Herper, J.: Innovative tools to improve incremental bulk forming processes. Key Engineering Materials. 554 (2013), 1490-1497.
  • Vierzigmann, U.; Schneider, T.; Koch, J.; Merklein, M.; Engel, U.; Hense, R.; Biermann, D.; Krebs, E.; Lucas, H.; Denkena, B.; Herper, J.; Tillmann, W.; Stangier, D.: Untersuchungen von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Hrsg.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, 137-162
  • Tillmann, W.; Sprute, T.; Hoffmann, F.; Selvadurai, U.; Fischer, G.: Influence of Bias voltage on Tribological Behavior and Residual Stresses of Cr/CrAlN Multilayer Sestems. China Surface Engineering, 26 (2013) 1-9.
  • Biermann, D.; Kirschner, M.; Pantke, K.; Tillmann, W.; Herper, J.: New coating systems for temperature monitoring in turning processes. Surface and Coatings Technology, 215 (2013) 376-380.

2012

  • Tillmann, W.; Bejarano Gaitán, G.; Hoffmann, F.: Deposition of hard and adherent TiBCN films for cutting tools applications. Physica Status Solidi (a), 209 (2012) 1520-1525.
  • Vogli, E.; Hoffmann, F.; Bartis, E.; Oehrlein, G.S.; Tillmann, W.: Correlation between tribological properties, sp²/sp³-ratio and H-content of low-wear diamond-like carbon (DLC) layers. Materials Science Forum, 706-709 (2012) 2596-2601.
  • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Biermann, D.; Tillmann, W.; Herper, J.: Improved Tool Surfaces for Incremental Bulk Forming Processes of Sheet Metals. Key Engineering Materials 504 (2012) 975-980.
  • Tillmann, W.; Herper, J.: Development and Tribological Investigation of the Coating System Chromium Carbonitride (CrCN) to Different Surface Designs. Journal of Materials Science and Engineering, 4 (2012) 223-229.

2011

  • Biermann, D.; Merklein, M.; Engel, U.; Tillmann, W.; Surmann, T.; Hense, R.; Herper, J.; Koch, J.; Vierzigmann, U.; Krebs, E.: Umformwerkzeuge in der Blechmassivumformung. In: : Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E.; (Hrsg.): 1. Workshop Blechmassivumformung, 1(2011)1, Bamberg: Meisenbach, 119-138
  • Hetzner, H.; Tillmann, W.; Tremmel, S.; Herper, J.: Tribologische Dünnschichten für die Blechmassivumformung. In: Merklein, M.; Bach, F.-W., Tekkaya, A.E. (Hrsg.): 1. Workshop Blechmassivumformung, (2011), Bamberg: Meisenbach, 139-158
  • Tillmann, W.; Hoffmann, F.; Momeni, S.; Heller, R.: Hydrogen quantification of magnetron sputtered hydrogenated amorphous carbon (a-C:H) coatings produced at various bias voltages and their tribological behavior under different humidity levels. Surface and Coatings Technology, 206 (2011) 1705-1710.
  • Vogli, E.; Tillmann, W.; Selvadurai-Lassl, U.; Fischer, G.; Herper, J.: Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties. Applied Surface Science, 257 (2011) 8550-8557.
  • Tillmann, W.; Momeni, S.; Hoffmann, F.: Sliding wear behaviour of diamond-like carbon (DLC) coatings deposited on plasma nitrided steels. International Journal of Materials Research, 102 (2011) 1007-1013.

2010

  • Tillmann, W.; Vogli, E.; Momeni, S.: Improvement of press dies used for the production of diamond composites by means of DUPLEX-PVD-coatings. Surface and Coatings Technology, 205 (2010) 1571-1577.
  • Tillmann, W.; Vogli, E.; Momeni, S.: Surface Modification of Press Dies Used in a Powder Metallurgical Production Process. Advanced Engineering Materials, 12 (2010) 1146-1153.
  • Tillmann, W.; Selvadurai‐Laßl, U.; Vogli, E.; Fischer, G.; Hoffmann, F.: Röntgenographische Eigenspannungsermittlung am Beispiel von PVD‐Multilayer‐Beschichtungen, 41 (2010) 482-488.
  • Tillmann, W.; Vogli, E.; Hoffmann, F.: Influence of substrate nitriding on adhesion, friction and wear resistance of DLC (diamond-like carbon)-coatings. Key Engineering Materials, 438 (2010) 211-218.
  • Tillmann, W.; Vogli, E.; Herper, J.; Haase, M.: Nanostructured Bionic PVD-Coatings for Forming Tools. Key Engineering Materials, 438 (2010) 41-48.
  • Tillmann, W.; Vogli, E.; Herper, J.; Biermann, D.; Pantke, K.: Development of temperature sensor thin films to monitor turning processes, 210 (2010) 819-823.
  • Tillmann, W.; Vogli, E.; Momeni, S.: Effect of Plasma Treatment on Adhesion of DLC Layers to Steels. Materials Science Forum, 638-642 (2010) 812-817.

2009

  • Tillmann, W.; Vogli, E.; Momeni, S.: Employing PVD thin films on press dies used in production of diamond composites. Powder Metallurgy, 52 (2009) 329-333.
  • Tillmann, W.; Vogli, E.; Hoffmann, F.: Wear-resistant and low-friction diamond-like-carbon (DLC)-layers for industrial tribological applications under humid conditions. Surface and Coatings Technology, 204 (2009) 1040-1045.
  • Tillmann, W.; Vogli, E.; Momeni, S.: Mechanical and tribological properties of Ti/TiAlN duplex coatings on high and low alloy tool steels. Vacuum, 84 (2009) 387-392.
  • Tillmann, W.; Vogli, E.; Gathen, M.; Momeni, S.: Development of wear resistant pressing moulds for the production of diamond composites. Journal of Materials Processing Technology, 209 (2009) 4268-4273.
  • Biermann, D.; Pantke, K.; Tillmann, W.; Vogli, E.: Tool coatings as thermocouple for chipping. 138th Annual Meeting and Exhibition, Supplemental Proceedings, 3 (2009) 389-393.
  • Biermann, D.; Pantke, K.; Tillmann, W.; Vogli, E.: Daten von der Wirkstelle - Beschichtung von Wendeschneidplatten zur Temperaturmessung. WB Werkstatt + Betrieb, 4 (2009) 54-57.
  • Tillmann, W.; Vogli, E.; Baumann, I.; Hoffmann, F.: Functional wear resistant tool surfaces for hot metal forming processes. 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel Proceedings, 1 (2009) 217-221.

2008

  • Tillmann, W.; Vogli, E.: Multilayers Design for the Electromagnetic Sheet Metal Forming Die. Advanced Engineering Materials, 10 (2008) 79-84.
  • Vogli, E.; Hoffmann, F.; Nebel, J.; Risch, D.; Brosius, A.; Tillmann, W.; Tekkaya, A.E.: Novel layers for dies used in electromagnetic sheet metal forming processes. 3rd International Conference on High Speed Forming (ICHSF) Proceedings, 3 (2008) 301-312.

2007

  • Tillmann, W.; Vogli, E., Hoffmann, F.: Low-friction diamond-like carbon (DLC)-layers for humid environment. Thin Solid Films, 516 (2007) 262-266.
  • Tillmann, W.; Vogli, E., Mohapatra, S.: A new approach to improve SCC resistance of austenitic stainless steel with a thin CrN film, deposited by cathodic vacuum arc deposition technique. Surface and Coatings Technology, 202 (2007) 750-754.
  • Tillmann, W.; Gathen, M.; Vogli, E., Ullrich, C.: Neue Kapseltechnik für Diamantverbundwerkstoffe mittels PVD‐Verfahren. Materialwissenschaft und Werkstofftechnik, 38 (2007) 473-480.
  • Tillmann, W.; Vogli, E., Nebel, J.: Deposition of MultiFunctional Coatings by Physical Vapour Deposition. Material Science Forum, 539-543 (2007) 1194-1199.

2006

  • Weinert, K.; Tillmann, W.; Hammer, N.; Kempmann, C.; Vogli, E.: Tool Coatings as Thermocouple for the Monitoring of Temperatures in Turning Processes. Advanced Engineering Materials, 8 (2006) 1007-1010.
  • Tillmann, W.; Vogli, E.: Entwicklung von PVD-Verschleißschutzschichten für Schraubenrotoren. VDI-Berichte, 1932 (2006) 239-249.

2005

  • Weinert, K.; Tillmann, W.; Hammer, N.; Kempmann, C.; Vogli, E.: Werkzeugbeschichtungen als Thermoelement für die Zerspanung. Werkstatt und Betrieb, 138 (2005) 27-30.